RAID Kонтролер Areca ARC-1203-2I, от PCIe 2.0 x1(м) към 2x SATA 3(ж), 512MB DDR3 RAM, RAID 0,1, Sigle Disk, JBOD

Areca ARC-1203-2I
(2-Port PCIe x1 to SATA RAID Adapter)

The Areca ARC-1203-2I SATA RAID host adapter is a PCIe 2.0 x1 bus to 6Gb/s SATA disk array host adapter. It provides two SATA lll ports on a single controller. It is used the same RAID kernel of its field-proven 6Gb/s, and 12Gb/s SAS RAID controller and uses the same drivers and management tools to help keep implementation and maintenance costs low. When properly configured, the SATA RAID adapter can provide a high degree of performance and fault tolerance with data mirroring for maximum protection. The ARC-1203-2I is the industry's most compelling 2-port 6Gb/s SATA RAID solution which economically delivers fullfeatured true hardware RAID to desktop and workstations as well as entry-level servers.

PCIe 2.0 x 1 SATA RAID Controller
Model Name
ARC-1203-2I

I/O Processor
ARM_based 1066MHz storage I/O processor

Host Bus Type
PCIe 2.0 x 1 Lanes

RAID Level Support
0, 1, Single Disk and JBOD

On-Board Cache
512MB on-board DDR3-1066 SDRAM

Driver Connector
2*SATA lll

Driver Support
up to 2*SATA lll drives

Management Port
In-Band: PCIe / Out-of-Band: LCD

Form Factor (H x L)
Low Profile: 64.4 x 134 mm

Architecture

1066MHz storage processor
PCIe 2.0 x1 bus
512MB on-board DDR3-1066 SDRAM
Write-through or write-back cache support
Support up to 2 SATA lll drives
Multi-adapter support for large storage requirements
BIOS boot support for greater fault tolerance
Boot support for the uEFI host BIOS
BIOS PnP (plug and play) and BBS (BIOS boot
specification) support
NVRAM for RAID event & transaction log
Redundant flash image for adapter availability
Battery Backup Module (BBM) ready (optional)
RoHS Compliant

RAID Features
Support RAID level 0, 1, Single Disk and JBOD
Configurable stripe size up to 1024KB
Multiple RAID selection
Online array roaming
Online RAID level/stripe size migration
Online capacity expansion and RAID level migration
simultaneously
Instant availability and background initialization
Automatic drive insertion/removal detection and
rebuilding
Greater than 2TB capacity per disk drive support
Greater than 2TB per volume set (64-bit LBA
support)
SED (self-encrypting drives) function support
Support intelligent power management to save
energy and extend service life
Support for native 4K and 512 byte sector SATA
devices
Support HDD firmware update


Виж още Контролери Areca
Виж всички Контролери в категорията