Тестер мрежови CableMaster 500, RJ45/RJ12, LCD дисплей

Тестер мрежови CableMaster 500 Softing

CableMaster 500- Cable tester and fault locator

Article Number: 226512

Affordable Cable Tester and Fault Locator

The CableMaster 500 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems. It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The CableMaster

500 has a large, bright backlit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing.

Cable Verification

Tests voice (6 wire), data (8 wire) and video (coax)

Easy to read, extra large 7-segment LCD screen with large icons

Tone generation over voice, data and video cables, with 4 different tones

Measures length of entire cable and individual wire pairs

RJ (Voice & Data) master remote stores in bottom of case

Maps 19 locations at one time

Tests and indicates pins with shorts, opens, reversals, miswires and split pairs

Displays “Pass” icon for correctly wired T568A/B and crossover/uplink

Displays “Pass” icon for correctly wired 6-pin telephone plus “Rev” for reversepinned

Low power consumption for long battery life

Auto power-off

Conveniences

Built-in LED Flashlight

Easy-to-read Large Backlit LCD Display

Glow-in-the-Dark Buttons

Audible Beep for Additional Feedback

Ergonomic Slip-resistant Side Grips

Self-stored Master Remote - Squeeze remote at finger grip openings in main unit to remove

RJ45, RJ12 and F-Jack on Main Unit and Remote


Виж още Инструменти за изграждане Мрежи Softing
Виж всички Инструменти за изграждане Мрежи в категорията