Noctua NF-A14-24V-IP67-iPPC-3000-PWM
Noctua NF-A14-24V-IP67-iPPC-3000-PWMNoctua NF-A14-24V-IP67-iPPC-3000-PWM

Вентилатор 140mm, Noctua NF-A14-24V-IP67-iPPC-3000-PWM, 4-пинов, 3000 rpm

id 75636 Код: FANCSNOCTUANFA1424VIP67IPPC300
    54.80 лв

    Всички цени са с начислен ДДС

    ОписаниеХарактеристикиРевюта / Въпроси
    Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. The 24V variant uses a dedicated wide input range version of Noctua's NE-FD2 motor driver IC in order to support 24V-based industrial applications. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology guarantees an MTBF of over 150.000hrs. Topped off with Noctua’s trusted reliability and 6 years manufacturer’s warranty, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

    Award-winning NF-A14 design
    Having received more than 100 awards and recommendations from the international press, Noctua's NF-A14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.

    3000rpm industrialPPC version
    Running twice as fast as the 1500rpm retail version, the NF-A14 industrialPPC-3000 provides extreme airflow and pressure performance. Combined with the industrialPPC series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.

    24V version
    The industrialPPC 24V models use a dedicated wide input range version of Noctua's NE-FD2 three-phase PWM motor driver IC. Supporting operating voltages from 6 to 30V, these models are ideal for 24V-based industrial applications and voltage- or PWM-based speed control.
    Lower speed and noise levels in 12V PC environments
    Lower speed and noise levels in 12V PC environments
    While the industrialPPC 24V model has been designed with 24V industrial applications in mind, it runs at a maximum speed of around 1800rpm in 12V PC environments and can be slowed down further via PWM, thus combining industrialPPC features and design with Noctua’s signature quietness.

    Three-phase motor design
    While most axial fans use single-phase motors with 4 slots, Noctua's industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.

    Certified IP67 water- and dust protection
    The motor and PCB of the IP67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating IP67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.

    Fibre-glass reinforced polyamide construction
    Both the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans.

    Flow Acceleration Channels
    The NF-A14 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

    AAO Frame
    Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.

    Stepped Inlet Design
    Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
    Inner Surface Microstructures
    With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

    Integrated Anti-Vibration Pads
    Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.
    SSO2 Bearing
    The NF-A14 industrialPPC features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

    Metal bearing shell
    In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14 industrialPPC sports a CNC milled bearing shell made entirely from brass.

    6-year manufacturer’s warranty
    Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14 industrialPPC features an MTBF rating of more than 150.000 hours and comes with a full 6-year manufacturer’s warranty.

    Custom-designed PWM IC with SCD
    Supporting fully automatic PWM speed control, the NF-A14 industrialPPC uses Noctua's custom-designed NE-FD2 PWM IC for three-phase motors. The NE-FD2 integrates Noctua's proprietary Smooth Commutation Drive (SCD) technology, which suppresses PWM switching noises and thus makes the fan quieter at lower speeds.

    Customisable for industry clients
    For industry clients, various features, certificates, packaging options and accessories can be customised on requests. For example, we can provide 24V versions, different connectors and speeds, different cable length or UL and TÜV certification. Please feel free to contact us for customised offers!



    FAN Specification

    Size
    140x140x25 mm
    Connector
    4-Pin PWM
    Bearing
    SSO2
    Blade Geometry
    A-Series with Flow Acceleration Channels
    Frame Technology
    AAO
    Rotational Speed (+/- 10%)
    3000 RPM
    Min. Rotational Speed (PWM, +/-20%)
    800 RPM
    Rotational Speed @ 12V (+/- 10%)
    1800 RPM
    Airflow
    269,3 m³/h
    Acoustical Noise
    41,3 dB(A)
    Static Pressure
    10,52 mm H₂O
    Max. Input Power
    7,92 W
    Max. Input Current
    0,33 A
    Voltage
    24 V
    MTBF
    > 150.000 h
    Scope of Delivery
    Fan
    4 Fan Screws
    Warranty
    6 years
    Ingress Protection
    IP67
    Material
    Fibre-glass reinforced polyamide
    Motor type
    Three-phase



    Виж още Вентилатори Noctua
    Виж всички Вентилатор за компютър в категорията

    Технически характеристики

    Размер:  140 мм

    Добави Ревю / Въпрос

    Оцени продукта или задай въпрос?

    0.00 от 0 ревюта
    • 5
      0 ревюта
    • 4
      0 ревюта
    • 3
      0 ревюта
    • 2
      0 ревюта
    • 1
      0 ревюта
    • Какво пазаруват другите Какво пазаруват другите
    • Какво пазаруват другите Най-продавани продукти
    • Какво пазаруват другите Промоционални продукти

    Noctua NF-A14-24V-IP67-iPPC-3000-PWM
    • Noctua NF-A14-24V-IP67-iPPC-3000-PWM
    • Noctua NF-A14-24V-IP67-iPPC-3000-PWM