HPE Aruba IAP-225 (RW) Instant (JW240A)
HPE Aruba IAP-225 (RW) Instant (JW240A)

Аксес пойнт HPE Aruba IAP-225 (RW) Instant, 2.4GHz(600Mbps)/5GHz(1300Mbps), 2xLan 10/100/1000 PoE, USB 2.0, 6x вътрешни антени

id 117092 Код: NTWBHPEJW240A
  • Модел: Aruba IAP-225 (RW) (JW240A)
  • Марка: HPE
  • Гаранция: 99 месеца
  • Код на продукта: JW240A
  • Безжична скорост: 1300 Mbps
  • Wi-Fi Стандарт: Wi-Fi 5 (802.11ac)
  • Честота: 2.4 & 5 GHz
  • Антени: 6 Вътрешни
  • PoE: In
  • Интерфейс: 2x 1000 + USB 2.0
  • Наличност: Стар продукт
    ОписаниеХарактеристикиРевюта / Въпроси
    HPE Aruba IAP-225 (RW) Instant
    (JW240A)

    AP-220 SERIES SPECIFICATIONS
    IAP-225
    - 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three integrated omnidirectional downtilt antennas.

    WIRELESS RADIO SPECIFICATIONS
    • AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n
    - In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.
    • Software-configurable dual radio supports 5 GHz and 2.4 GHz
    • 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
    • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions apply):
    - 2.4000 GHz to 2.4835 GHz
    - 5.150 GHz to 5.250 GHz
    - 5.250 GHz to 5.350 GHz
    - 5.470 GHz to 5.725 GHz
    - 5.725 GHz to 5.850 GHz
    • Available channels: Dependent upon configured regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Supported radio technologies:
    - 802.11b: Direct-sequence spread-spectrum (DSSS)
    - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    - 802.11n/ac: 3x3 MIMO with up to three spatial streams
    • Supported modulation types:
    - 802.11b: BPSK, QPSK, CCK
    - 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
    - 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    - 2.4-GHz band: +23 dBm (18 dBm per chain)
    - 5-GHz bands: +23 dBm (18 dBm per chain)
    • Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay diversity (CDD) for improved downlink

    RF performance
    • Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased reliability in signal delivery
    • Supported data rates (Mbps):
    - 802.11b: 1, 2, 5.5, 11
    - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    - 802.11n: 6.5 to 450 (MCS0 to MCS23)
    - 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

    POWER
    • Worst-case power consumption from the AP (excluding power drawn by an attached USB device):
    - In restricted mode (PoE): 13.5W
    - In unrestricted mode (PoE): 17W
    - In unrestricted mode (DC): 15.5W
    • Power sources sold separately
    • Direct DC source: 12 Vdc nominal, +/- 5%
    • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source
    - Efficient mode PoE – power save with 802.3af PoE and
    limited functionality
    > USB port disabled
    > Second Ethernet port disabled
    > 2.4-GHz 802.11n radio in 1x3:1 spatial-stream mode
    > 5-GHz 802.11ac radio operates without restrictions*
    - Unrestricted functionality with 802.3at PoE+
    *With ArubaOS software 6.3.0, the 5-GHz 802.11ac radio operates in 2x3:2 spatial stream mode when the AP is powered by 802.3af PoE. This restriction has been removed in 6.3.1.

    ANTENNAS
    • AP-224: Three RP-SMA connectors for external dualband antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 3.0 dB in 5 GHz.
    • AP-225: Six integrated downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225. The downtilt angle for maximum gain is approximately 30 degrees.

    OTHER INTERFACES
    • Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
    - Auto-sensing link speed and MDI/MDX
    - Load balancing support to achieve platform throughput greater than 1 Gbps
    - 802.3az Energy Efficient Ethernet (EEE)
    - PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+
    • DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5 mm length
    • USB 2.0 port (Type A connector)
    • Serial console interface (RJ-45)
    • Visual indicators (LEDs):
    - Power/system status
    - Ethernet link status (2x; ENET0, ENET1)
    - Radio status (2x; RAD0, RAD1)
    • Kensington security slot
    • Reset button

    MOUNTING
    • Included with AP:
    - Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling
    • Optional mounting kits:
    - AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails.
    - AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket.
    - AP-220-MNT-W3: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle.

    MECHANICAL
    • Dimensions/weight (unit, excluding mount accessories):
    - 203 mm (W) x 203 mm (D) x 54 mm (H), 8.0” (W) x 8.0” (D) x 2.1” (H)
    - 750 g/27 oz
    • Dimensions/weight (shipping):
    - 315 mm (W) x 265 mm (D) x 100 mm (H), 12.4” (W) x 10.4” (D) x 3.9” (H)
    - 1,250 g/44 oz


    Виж още Аксеспойнт/Репитер Безжични HPE
    Виж всички Аксеспойнт/Репитер Безжични в категорията

    Технически характеристики

    Тип:  Аксес пойнт
    Монтаж:  За вътрешен монтаж
    Безжична скорост:  1300 Mbps
    Wi-Fi Стандарт:  Wi-Fi 5 (802.11ac)
    Честота:  2.4 & 5 GHz
    Антени:  6 Вътрешни
    dBi на антена/и:  3.5
    PoE:  In
    Интерфейс:  2x 1000 + USB 2.0
    Други:  Няма

    Добави Ревю / Въпрос

    Оцени продукта или задай въпрос?

    0.00 от 0 ревюта
    • 5
      0 ревюта
    • 4
      0 ревюта
    • 3
      0 ревюта
    • 2
      0 ревюта
    • 1
      0 ревюта
    • Какво пазаруват другите Какво пазаруват другите
    • Какво пазаруват другите Най-продавани продукти
    • Какво пазаруват другите Промоционални продукти

    HPE Aruba IAP-225 (RW) Instant (JW240A)
    • HPE Aruba IAP-225 (RW) Instant (JW240A)