Кутия BitFenix Enso RGB TG, EATX/ATX/Micro ATX/Mini ITX, 2x USB 3.0, 1x RGB вентилатор, черна, без захранване

BitFenix Enso RGB Black TG

(BFC-ENS-150-KKWGK-RP)

 

BitFenix presented Aurora, Shogun and Alchemy 2.0 RGB Magnetic LED Strips co-developing AURA SYNC technology with Asus bringing in the comprehensive neat RGB LED concept for PC build . Today BitFenix present the BitFenix ENSO and the Alchemy 3.0 Addressable RGB Magnetic LED Strips, again co-developing with Asus, supporting the latest ASUS AURA SYNC 3-pin technology for addressable RGB illumination.

 

Sleek Design With Metallic Front & Enhanced AURA SYNC 3 Pin Addressable RGB illumination

With the ENSO, BitFenix is launching the long awaited case shown at Taipei’s Computex 2017, available in black and white. The clean design concept is well balanced between a perfectly organized interior structure and a sleek exterior design. It is complemented by a 4mm see-through-tinted tempered glass panel on the side and addressable RGB illumination surrounding the metallic front. It comes with a pre-installed controller, compatible to both, BitFenix Alchemy 2.0, static, and BitFenix 3.0, addressable, RGB products.

Clean Interior With 23mm Cable Management Space Behind Motherboard Tray

The ENSO comes with a PSU shroud hiding the PSU and up to two HDDs beneath it, while three SSDs can be attached to the back of the motherboard tray, showing only the motherboard, graphics cards and the cooling solution through the tempered glass panel. The 23mm cable management space behind motherboard tray makes it an easy job to manage the cables clean

 

 

Easy Clean With Side-way Removable Dust Filters

To keep the interior of the ENSO dust-free, multiple filters are placed around the case. The top filter is attached via magnets and can be easily slid off to clean it. The ENSO also features BitFenix’ new sideway-removable filters in the front and the bottom, thus enabling users to remove the front and PSU filter easily without lifting or moving the case.

 

Specifications:

 

• Material Steel │ Plastic │ Tempered Glass
• Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX up to 272mm
• Maximum CPU Cooler Height 160mm(6.2 inch)
• Maximum Graphics Card Support (Length) 340mm(13.3inch)
• Maximum Graphics Card Support (width) 150mm(5.9 inch)
• Expansion Slots (PCI-E) 7
• Front I/O Ports 2 x USB 3.0, 1 x Audio/Mic
• 2.5" Drive Bay 3
• 3.5" Drive Bay 2 (Usable as 2.5" bay)
• Fan Support(Front) 2 x 140mm or 3 x 120mm
• Fan Support(Top) 2 x 120mm
• Fan Support(Rear) 1x 120mm
• Included Fans(Front) 1 x 120mm Fan (Black)
• Included Fans(Rear) 1 x 120mm Fan (Static RGB)
• Radiator Support(Front) 1 x 240mm or 280mm (thickness up to 35mm(1.4inch) / width up to 141mm(5.6inch) )
• Radiator Support(Rear) 1 x 120mm
• Power Supply ATX & Standard / up to 160mm(6.3inch)
• Dimensions (W x H x D) 210mm(8.3inch) x 489mm(19.3inch) x 454mm(17.9inch)
• Weight 7kg(15.4 lbs)

 

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още Компютърни кутии BitFenix
Виж всички Компютърни кутии в категорията